How to Calculate Your Total Cost of Risk: A Practical Framework for Finance Leaders
By Poms & Associates Insurance Brokers, LLC ·
Most organizations can state their insurance premium to the dollar. Far fewer can state what risk actually costs them. The difference matters, because decisions made on premium alone can reduce one number while increasing the total. A program with a lower premium and a higher deductible, for example, may look more efficient on the renewal summary while shifting cost into retained losses that never appear on the same page.
We have explained why the lowest premium and the lowest cost of risk are frequently different numbers. This post is the practical companion: how a finance or risk leader can actually calculate total cost of risk, what to include, and how to use the result.
What Total Cost of Risk Includes
Total cost of risk, often abbreviated TCOR, is the sum of what an organization spends to finance and manage its risk. It is commonly built from four components.
Insured costs. Premiums across all lines of coverage, plus taxes, fees, and surcharges, and any broker fees paid separately.
Retained losses. Losses the organization pays itself, including deductibles, self-insured retentions, claims below the deductible, and losses that fall outside coverage because of exclusions or limits.
Risk control and administrative costs. Spending on safety and loss control, claims administration, third-party administrator fees, consultants, and the internal time devoted to managing insurance and claims.
Cost of capital tied to the program. Collateral such as letters of credit, deposits, and reserves that tie up capital or carry fees, even when no claim is paid from them.
Some organizations also estimate indirect costs of incidents, such as downtime, overtime, replacement labor, and disruption. These are harder to measure, but they are real, and they often exceed the direct claim cost for operational losses.
Step One: Define the Scope
Decide which lines to include. A complete view covers property, general liability, automobile, workers' compensation, umbrella and excess, professional liability, cyber, directors and officers, and any other lines the organization purchases or self-insures. Employee health benefits are often analyzed separately because of their size and structure, though the same logic applies, as discussed in our post on health plan funding strategies.
Consistency matters more than completeness at the start. Choose a scope and keep it stable so that trends are meaningful.
Step Two: Gather the Data
The inputs typically come from several places.
- Premium and fee data from policies, invoices, and the broker.
- Loss runs from each carrier and administrator, covering several years.
- Retained loss records, including deductible reimbursements and self-funded claims.
- Administrative costs, including third-party administrator fees, loss control vendors, and an allocation of internal staff time.
- Collateral and financing costs, including the fees or cost of capital on letters of credit and deposits.
A broker should be able to assemble much of this. The harder items are usually internal costs and indirect costs, which require estimates.
Step Three: Value Losses Consistently
This is where many calculations go wrong. Open claims are not finished, and their eventual cost is usually different from what has been paid or reserved to date. Mixing paid figures for one year with incurred figures for another, or comparing losses valued at different dates, distorts the picture.
Use a consistent valuation date across all years. Use incurred amounts, which include reserves, rather than paid amounts alone. For retained losses in self-insured or high-deductible programs, consider whether claims that have occurred but not yet been reported, or that are likely to develop adversely, should be estimated. Actuaries often apply development factors to do this, and for significant programs their input is worthwhile.
Step Four: Normalize the Result
A total dollar figure is hard to interpret on its own. Dividing by an exposure base makes it comparable over time and across business units. Common measures include:
- Total cost of risk per thousand dollars of revenue
- Total cost of risk per employee
- Total cost of risk per hundred dollars of payroll for payroll-driven lines
- Total cost of risk per vehicle or per unit of production for specific lines
Tracking these ratios over five years shows whether risk is becoming more or less costly relative to the size of the business. Industry benchmarking can add context, but it should be used cautiously, since differences in operations, size, and risk appetite make direct comparisons imperfect.
Step Five: Read the Composition, Not Just the Total
Two organizations with the same total cost of risk can be in very different positions. Look at how the total is divided.
Share of premium versus retained loss. A program that is mostly premium has transferred most risk to carriers. One with a large retained component is carrying more volatility.
Line by line. Some lines may be driving most of the cost, which directs attention to where improvement is most valuable.
Location and department. Costs often concentrate in a few places, which is where root cause work, as described in our post on root cause analysis after a claim, should begin.
Frequency versus severity. Many small claims suggest a process or training issue. A few large ones may point to specific exposures or the need for different limits.
Step Six: Use It to Make Decisions
The calculation is valuable only if it informs choices. Three uses stand out.
Comparing Retention Options
Consider a hypothetical organization choosing between two program structures. Program A carries a premium of 900,000 dollars with a low deductible, expected retained losses of 120,000 dollars, and administrative costs of 40,000 dollars, for an expected total of 1,060,000 dollars. Program B carries a lower premium of 780,000 dollars, but a higher deductible produces expected retained losses of 330,000 dollars, higher administrative costs of 60,000 dollars, and 15,000 dollars in collateral costs, for an expected total of 1,185,000 dollars.
On the renewal summary, Program B appears to save 120,000 dollars. On a total cost basis, it is expected to cost 125,000 dollars more, before considering that retained losses are volatile and could be much higher in a bad year. This is the kind of comparison that premium alone cannot reveal. Expected cost is only part of the analysis. The organization should also ask whether it can absorb a poor year without strain, which is a question of risk tolerance and balance sheet capacity.
Justifying Prevention Investments
Total cost of risk makes the financial case for safety and loss control. Reducing claims lowers retained losses, administrative costs, and, over time, premium. An investment in training, equipment, or process improvement can be evaluated against the reduction in total cost it produces, in the same way as any other capital allocation.
Telling the Story to Underwriters
An organization that understands its total cost of risk, and can show how corrective actions are reducing it, presents a stronger account. Underwriters price the future, and a credible plan supported by data helps. This is part of how a brokerage takes an account to market.
Common Pitfalls
Counting only premium. It is the easiest number to find and the least complete.
Ignoring loss development. Using paid losses or mixing valuation dates understates the cost of recent years.
Overlooking uninsured and excluded losses. Losses outside coverage still cost the organization, and they are often missed.
Excluding internal and indirect costs. Staff time, downtime, and disruption are real costs, even when estimated.
Judging a retention decision on a single year. One favorable year can make a higher deductible look wise, and one adverse year can make it look foolish. Evaluate over a longer horizon and across plausible scenarios.
Changing definitions from year to year. Trend analysis requires consistent methods.
Governance: Make It a Recurring Discipline
The most effective organizations calculate total cost of risk annually, report it to senior finance leadership and, where appropriate, the board, and use it to set targets. It becomes part of the budgeting and renewal conversation, not a one-time exercise. Linking it to loss control efforts and, for workers' compensation, to experience modification rate trends gives leadership visibility into whether risk management efforts are working.
Questions to Ask
- Do we know our total cost of risk, or only our premium?
- Are our losses valued consistently, and do they reflect development on open claims?
- How much of our cost is retained, and how would a poor year affect us?
- Where is our cost concentrated by line, location, and cause?
- Has our last retention decision been evaluated on total cost, not just premium savings?
The Bottom Line
Total cost of risk turns insurance from a line item into a managed expense. It reveals where the money goes, supports better decisions about retention and prevention, and gives leadership a clear basis for evaluating a renewal. Poms & Associates helps organizations build this view, starting from the same risk assessment approach behind every program we build, so that decisions rest on the full cost and not just the number on the invoice.
If you have never calculated your total cost of risk, or have not updated it recently, talk to a Poms & Associates advisor before your next renewal.
Frequently Asked Questions
How do you calculate total cost of risk? Add insured costs such as premiums and fees, retained losses such as deductibles and uninsured claims, risk control and administrative costs, and the cost of collateral and reserves. Some organizations also estimate indirect costs such as downtime. Divide the total by an exposure base, such as revenue or payroll, to track it over time.
What is included in total cost of risk? It typically includes premiums, taxes and fees, losses the organization pays itself, loss control and claims administration costs, internal staff time, and capital tied up in collateral or reserves. Indirect costs of incidents may also be included as estimates.
Why does loss development matter in the calculation? Open claims often change in cost as they progress. Using paid amounts or mixing valuation dates can understate recent losses. Valuing all years consistently and accounting for development gives a more accurate picture.
How can total cost of risk help with a deductible decision? It allows an organization to compare program options on expected total cost, including retained losses and administrative costs, rather than on premium alone. It also frames the question of whether the organization can absorb an unfavorable year.
How often should an organization calculate total cost of risk? Annually is a common standard, timed ahead of renewal so that the results can inform strategy, retention decisions, and discussions with underwriters.